Evolution Wireless Digital features an equidistant tuning grid previously only found in our flagship Digital 6000 and Digital 9000 wireless systems. Quality components with exceptional linearity eliminate intermodulation between EW-D transmitters, allowing frequencies to be equally spaced every 600 kHz alongside each other. This simplifies frequency coordination for wireless beginners and seasoned professionals alike, and also contributes to the system’s scalability and impressively high channel count.
The power of Bluetooth Low Energy puts full control right in the palm of your hand with the Sennheiser Smart Assist app. Take advantage of a remarkably fast automated setup, mobile access to every system setting and the added benefit of remote monitoring, all from the convenience of your Android or iOS device. Save time, save energy and perform with confidence.
Features:
-
Digital transmission operating in the UHF spectrum greatly enhances range, reliability and scalability
-
Smart Assist App connects via Bluetooth Low Energy for a streamlined setup and operation at a distance
-
Auto scan creates reliable connections with minimal time and effort
-
134 dB audio input dynamic range eliminates need for sensitivity adjustments and preserves every detail
-
Elimination of intermodulation enables channels to be placed in an equidistant tuning grid 600 kHz apart
-
56 MHz of tuning bandwidth and equidistant spacing enables up to 90 channels
-
2,240 selectable frequencies allow for fine tuning
-
Lithium-Ion battery pack (sold separately) delivers up to 12 hours of operation (up to 8 hours of operation with 2x provided AA batteries)
Specifications:
-
Frequency range: 520 - 576 MHz
-
Dimensions: 212 x 44 x 189 mm
-
THD, total harmonic distortion: ≤ -60 dB for 1 kHz @ -3 dBfs input level
-
Weight: approx. 1000 g (without antennas and power supply)
-
Operating temperature: -10 °C - +55 °C (14 °F - 131 °F)
-
Current consumption: ≤ 300 mA
-
Input voltage range: 11 - 13 V ⎓
-
Transmission power: BLE: max. 10 mW EIRP
-
Operating relative humidity: 5 - 95 % (non-condensing)
-
Audio frequency response: 20 Hz - 20 kHz (-3 dB) @ 3 dBfs
-
Audio output level: 18 dBu max.
-
What's in the Box:
-
EW-D EM rack receiver
-
2 rod antennas
-
power supply with country adapters
-
rackmount set
-
4 rubber feet
-
quick guide
-
safety guide
-
manufacturer declaration sheet
The new RF VENUE 2-CHANNEL KIT 500T570 2 Channel Remote Antenna Kit for Wireless Microphones 500-570 MHz contains everything needed for smaller wireless microphone installations. The kit includes a pair of high quality 1/2 wave antennas, designed for front rack panel mounting using the included BNC pass through connectors, or for remote mounting using the included bracket hardware. Six 2' coaxial cables are also included to connect antennas to the included two way splitters and to any brand wireless microphone receiver. The kits are available in three frequency bands, 470-530, 500-570 and 530-608 MHz.
Ideally suited for A/V media carts, classrooms, or corporate meeting spaces, the 2 Channel Remote Antenna kit improves wireless system performance by bringing receive antennas to the front of the rack or outside equipment closets for the best quality signal.