The ProX XF-MESATRUSS Mesa Facade Truss Lighting Stand are Dual T-Bar Telescoping Lighting Pole Stands with Spanning Truss for XF-MESA MEDIA & XF-MESA Facades. The XF-MESATRUSS clamps to the rear vertical frame of the MESA Facade and provides a unique method of mounting lighting and other lightweight fixtures without taking up additional footprint space in the DJ area. It is constructed of durable aluminum and is finished in black. Ensure that the facade and truss is positioned on a hard stable surface, in a suitable location, on firm level ground and clear of overhead obstacles. When outdoors, secure the truss system with braces or cables, in the case of wind.
SAFETY INSTRUCTIONS
To avoid problems a competent person should inspect all rigging hardware, stands and equipment before each use and periodically do a major inspection for signs of wear, abuse, and general adequacy, as well as perform any manufacturer recommended preventive maintenance on schedule. Observe all warnings and usage instructions in the full manual.
Safety Notes:
Loading on the truss system should comply with rated weights.
Lock all the safety mechanisms (safety pins, knobs)
Loads must be centered & balanced
Safety cables or chains must be installed on each item attached to the unit.
Leave a safety perimeter with a radius 5ft greater than the maximum height of the truss during lifting and lowering of loads.
During transport, close all the sections and lightly tighten tube clamps
Do not attempt to move the facade when truss is loaded or in an extended position.
Features:
-
T-Bars extend 10 ft high
-
2 Interlocking 5 Foot Sections of "I" Truss
-
All Hardware Included
-
XXX lbs Capacity Evenly Distributed
-
Truss Tubing Diameter: 1 1/2"
-
All Metal Connectors & Clamps
Specifications:
-
To Fit: MESA and MESA MEDIA Facades
-
Weight: 68.00 lbs
-
Shipping Dimensions 46.00"L x 5.00"D x 10.00"H
-
Shipping Weight: 20.00 lbs
Dealer
EZ Returns
Match
