The BASSBOSS SSP215-MK3 5000W Dual 15” Self-Powered PA Subwoofer, slim but strong, providing powerful low-end performance and massive output at and above 35Hz. If there is not enough space on the stage or you just prefer 15-Inch woofer the BassBoss SSP215 is your choice.
Groundbreaking bass performance reaching frequencies lower than many double 18" cabinets. You like the tight, punchy, and articulate character of lower mass 15" cones. You need significant bass output but you have limited space or space is constrained in at least one dimension. Sometimes you need a smaller box but you don't want a smaller sound. The same big voice coils and big power amps used in the SSP218s, along with large internal volume and deep tuning, providing massive output at and above 35Hz, allow the SSP215-MK3 to comfortably take the place of double 18” boxes without giving up output or low-frequency extension.
A double-15" subwoofer cabinet made to go head-to-head with double 18" subs, this low-profile option has 5000W of amplification driving the woofers and a premium-grade DSP providing control and alignment. If 215 wasn't in the name, you'd never know it didn't have bigger drivers.
360 x 360 – Cardioid Mode Available with Multiple Boxes
Amplification:
5000 Watts Class D (2 x 2500W)
Processing:
Integrated comprehensive DSP. 96kHz sampling rate with 8 pushbutton presets. All presets include high pass filters, low pass filters, phase alignment, equalization and multi-stage limiting. Storage capacity for up to 100 presets
Electrical Connector Amp:
Neutrik powerCON True 1 TOP - IP65 rated waterproof connectors
Electrical Connector Mains:
Standard US 3-pin grounding 120V electrical plug: NEMA 5-15 (Edison)
Voltage Operating Range:
100-240V AC, 50-60Hz (Auto-sensing, auto switching universal supply)
Current Draw 120V:
9 Amps (Nominal)
Current Draw 240V:
4.5 Amps (Nominal)
Signal Input Connector:
XLR-F
Signal Output Connector:
XLR-M (direct pass-through only)
Enclosure Type:
Direct radiating, vented enclosure, optimally tuned for low frequency response with high sensitivity and high power handling
Transducer Low Frequency:
2 x 15 in. diameter (380mm) neodymium motor woofers with 4 in. (100mm) voice coils
Cabinet Construction:
CNC machined 18mm Birch plywood with extensive bracing and dado joinery. 4 integrated handles. 1 x 35mm steel pole socket. 4 rubber feet. 4 interlocking foot pockets. 16 X M10 threaded flypoints
Exterior Finish:
High-pressure, bonded polyurea coating. Rugged, waterproof. Textured black
Grille:
Perforated, powder-coated steel
Dimensions (HxWxD):
17.25 in. x 48 in. x 29.5 in. (18.5 in. high with feet)
By creating an account at agiprodj you will be able to shop faster, be up to date on an orders status, and keep track of the orders you have previously made.