Description

MP 2016S Rotary Knob DJ Mixer

The MP 2016S is a rotary-controlled mixer featuring six Input Channels, Booth and House Outputs, Pre-Effects Tape Outputs, Post-Effects Tape Outputs with Level control, switchable Effects Loop, and Headphone Cueing. Input Channels 1 through 4 feature high quality RIAA phono preamplifiers which may be switched to line input via rear panel switches. Input Channels 5 and 6 each provide a balanced mic preamp with Input Gain trim, Mic/Line switch, two-band EQ, Mic Engage switch and an internal Booth Ducking enable jumper. In addition to the six dedicated preamplifiers, all six Input channels may select any of the five stereo Auxiliary Inputs.

Each Input Channel provides a 6-position source selector, Input Gain control for matching levels, Signal/Overload indicators and a studio-grade Master Mix control.

The Booth Output may select Master or Cue as its source. An ultra-low noise, high power headphone amplifier also allows monitoring the Master Mix or Cue Mix. Since the original MP 2016, we've added Split Cue. Individual Cue switches on each channel drive a panning Master / Cue control for the Headphone output.

The Master Mix circuit provides Signal/Overload indicators, Mono switch and high-pass/rumble filters. In addition, the Master Output features patent-pending high performance 3-band, full-cut, Accelerated-Slope tone controls.

The MP 2016S provides exceptional ergonomics, good feel and a clean, intuitive layout packaged in a compact 19 inch, 3U rack mount chassis, a scant five inches deep.

MP 2016S Features

Split Cueing
Six stereo Input channels
Four dedicated stereo Phono / Line preamps
Two dedicated Mic / Line preamps with:
- Gain trims
- 2-band Tone controls
- Engage switches
- Booth ducking
Five stereo Auxiliary Inputs
Input Gain controls for level matching
Switchable Effects Loop
Booth Output with Master / Cue source switch
Separate Pre- and Post-effects Tape Outputs
Master Accelerated-Slope, full-cut, 3-band Tone controls
Audiophile / Studio sound quality
Highest quality Alps potentiometers
High power headphone amplifier
UL/cUL universal internal 100-240 VAC power supply

MP 2016S Specifications:

Parameter	Specification / Conditions / Comments
Gain (unbalanced outputs): 1 kHz, EQ centered, all levels max, add 6 dB for balanced output
..........Phono / Line	52 / 16 dB
.........Aux Line	16 dB
.........Mic / Line	66 / 36 dB
.........XP 2016S port	0 dB
..........House	+6 dB
Input Impedance:	at 1 kHz
.........Phono/Line	47.5 kΩ, Shunted by 200 pF
.........Aux Line	23 kΩ
.........Mic/Line	1.02 kΩ / 29 kΩ, Differential input impedance
.........Effects Return	5.11 kΩ
Max Input Level: Max input before input stage overload, @ 1 kHz
.........Phono/Line	77.5 mV
.........Aux Line	+20 dBu
.........Mic/Line, Max Gain	-30 / 0 dBu
.........Mic/Line, Min Gain	0 / +30 dBu
Output Impedance:	@ 1 kHz
.........Balanced	150 Ω, Each leg
.........Unbalanced	300 / 150 Ω, Other / Booth
Max Output Levels:	@ 1 kHz
.........Balanced	+26 dBu, 2 kΩ load
.........Unbalanced	+20 dBu, 2k Ω load
.........Headphone	150 / 120 mW, 600 / 150 Ω
Infrasonic Filter	15 Hz, 18 dB/octave
THD+N	.01 %, Line in to unbalanced output, 20 to 20 kHz, 80 kHz BW
Signal-to-Noise Ratio: Input gain set for unity, Tones set flat; Any one mix set to max (all others min), any unbalanced out.
..........Phono	91 dBu, Input shorted, “A” weighted
..........Mic	60 dBu, (Mic & Input Gains max) Input terminated 150 Ω
..........Line	94 dBu, Input terminated with 150 Ω
Signal Indicators: SIG / OL	-2 / +18 dBu
Crosstalk	-70 dB, Channel to channel, 1 kHz
Control Feed-through	-80 dB, 1 kHz
Master Tone Controls: Treble	4k, Shelving Hz, 2nd-order, range +6 dB to off
..........Mid	300 to 4k, Band-pass Hz, 2nd-order, range +6 dB to off
..........Bass	300, Shelving Hz, 2nd-order, range +6 dB to off
Microphone Tone Controls:
..........Bass	100, Shelving Hz, Range ±12 dB
..........Treble	5k, Shelving Hz, Range ±12 dB
Note: 0 dBu=0.775 Vrms

Optional XP 2016S Specifications:

Parameter	Specification / Conditions / Comments
Gain	0 dB, 1 kHz, tone flat
Input Impedance	20k Ω, 1 kHz
Max Input Level	+20 dBu, Before input overload @ 1kHz
Output Impedance	100 Ω, @ 1 kHz
Max Output Levels	+20 dBu, @ 1 kHz
THD+N: Post Crossfader	.01 %, 20 to 20 kHz, 80 kHz BW
..........Crossfader	.1 %, 20 to 20 kHz, 80 kHz BW
Noise	-82 dBu, Tones set flat
Meters: Type	Peak dBu, Follows MP 2016S Headphone source
Crossfader: Type	Active with Contour control
Crosstalk	-70 dBu, Channel to channel, 1 kHz
Control Feed-through	-80 dB, 1 kHz
Tone Controls: Treble	4 kHz, Shelving, 2nd-order, range +6 dB to off
..........Mid	300 Hz to 4 kHz, Band-pass, 2nd-order, +6 dB to off
..........Bass	300 Hz, Shelving, 2nd-order, range +6 dB to off
Note: 0 dBu=0.775 Vrms

Common Specifications

Parameter	Specification / Conditions / Comments
Unit: Agency Listing	UL/cUL/CE
Universal Line Voltage	100-240 VAC, 50/60 Hz
Maximum Power	12 W
Unit: Construction	All Steel
..........Size	5.25"H x 19"W x 5.3"D (3U), (13.3 cm x 48.3 cm x 13.5 cm)
..........Weight	11 lb, (5.0 kg) Each Unit
Shipping: Size	11" x 23" x 16", (27.9 cm x 58.4 cm x 40.6 cm)
..........Weight	18 lb, (8.1 kg) Each Unit

Extra Info

Send To Friend

Your Name :		Friend's Name :
Your Email :		Friend's Email :
Message : (optional)

SEARCH DJ Equipment

NAMM 2012 PRODUCTS

PROMOTIONAL BUNDLES

DJ GIFTS AROUND or UNDER $100

SALES & OPEN BOX DEALS

NEW ARRIVALS

DJ EQUIPMENT

SERATO PRODUCTS

TRAKTOR PRODUCTS

VIRTUAL DJ PRODUCTS

LIGHTING

RACKS & CASES

MICROPHONES

WIRELESS SPEAKER SYSTEMS

RECORDING & PRODUCTION

VIDEO (A/V) PRODUCTS

PRO AUDIO

CABLES & ADAPTERS

DJ Manufacturers

Blog

Payments Accepted

Rane MP 2016S Rotary Knob DJ Mixer (3U)