PIONEER VSW-1

Automatic Video Switcher for DVJ-X1 System

• Automatically or manually switch video sources
• Emulate Fader Start capability
• Take full advantage of Pioneer's revolutionary DVJ-X1

• The VSW-1 is simple in its design and extremely easy to use, ensuring that DVJs are able to mix audio/video content from separate sources without relying upon multiple independent devices or needing another artist in the DVJ booth.

  This Video Switcher gives performers more freedom in the mix because they can automatically switch video sources (by pressing the red "Auto" button) when using the familiar Fader Start capability found in all of Pioneer's Pro DJ mixers.

  The VSW-1 video switcher gives top DVJs the flexibility they need to take full advantage of Pioneer's revolutionary DVJ-X1.

  General specifications
  Power	AC110-120 V / 220 - 240 V
  Power consumption	9 W
  Operating temperature	+ 5C° to + 35C°
  Operating humidity	5 -85 % R.H. (without precipitation)
  Weight	1.4 kg
  External dimensions (W x D x H)	25 x 9 x 8.6 cm
  Video input section (input level/impedance)
  Component video BNC connectors x 3 (2 systems)	Y: 1 Vp-p / 75 Ohm
  	CB/PB: 0.7 Vp-p / 75 Ohm
  	CR/PR: 0.7 Vp-p / 75 Ohm
  S-Video S connector (2 systems)	Y: 1 Vp-p / 75 Ohm
  	C: 0.286 Vp-p / 75 Ohm
  Composite vide RCA connector (2 systems)	1 Vp-p / 75 Ohm
  Video output section (output level/impedance)
  Component vide BNC connectors x 3 (1 system)	Y: 1 Vp-p / 75 Ohm
  	CB/PB: 0.7 Vp-p / 75 Ohm
  	CR/PR: 0.7 Vp-p / 75 Ohm
  S-Vide S connector (1 system)	Y: 1 Vp-p / 75 Ohm
  	C: 0.286 Vp-p / 75 Ohm
  Composite vide RCA connector (1 system)	1 Vp-p / 75 Ohm
  Sync signal output section
  Sync output: BNC connector (2 systems)	1 Vp-p / 75 Ohm
  Supported video modulation systems	NTSC/PAL
  Other connectors
  Control input	minijack (3.5 dia) 2 systems
  Control output	minijack (3.5 dia) 2 systems