JBL PRX635/PRX618S-XLF System 2

INCLUDES:

2 PRX635

2 PRX618S-XLF

4 FREE 25' XLR CABLES ALONG WITH

2 SPEAKER STANDS AND A BAG FOR THE STANDS.



The PRX635 is a self-powered, lightweight three-way loudspeaker system capable of delivering a very high level of performance over a broad bandwidth.

    * This speaker is ideally suited to applications where the program material exhibits subtlety and nuance. Perfectly capable of reproducing high fidelity full range sound without a subwoofer, when coupled with extended low frequencies of the PRX618S-XLF, one experiences complete control over the entire audio spectrum. These cabinets can be stand-mounted but do require a large footprint tri-pod type stand. When pole mounting the PRX635 on a subwoofer we highly recommend a pole no longer than 24” (SS3BK-24 or SS4BK-24) to ensure stability and safety. As with all the full-range PRX600 Series systems two EQ selections can be used to optimize the system for the program material and/or environment. The input section also accommodates either Line or Mic/Instrument level inputs.

    * The PRX635 is a self-powered, lightweight three-way loudspeaker system capable of delivering a very high level of performance over a broad bandwidth. The PRX635 is comprised of one 380 mm (15 in) 265F Differential Drive® woofer, a 165 mm (6.5 in) 195H horn-loaded 90° by 50° mid-range and a 2414H 25.4 mm (1 in) annular polymer diaphragm, neodymium compression driver mounted to a 90° by 50° horn, all driven by a 1500 watt (3 x 500) Audio Class-D power amplifier. A propriety DSP chip is at the core of a fully featured input section, providing user selectable system EQ, protection, input sensitivity selection, cross-over functionality, dynamic limiting and discrete component optimization.

    * The amplifier input panel offers XLR or ¼ inch jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer. Signal present and overload lights indicate the system status and assist in setting the optimum level, via the level control knob.

    * All PRX600 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX600 Series cabinets are protected by JBL’s tour proven DuraFlex™ finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of 1000 lbs. each.

    * Special note: The PRX635 should be pole-mounted on a PRX 600 subwoofer using a pole no longer than 24” in length. (SS3-BK24
      or SS4-BK24)

FEATURES:

    * Maximum SPL 135 db peak
    * 380 mm (15 in) Differential Drive® dual voice-coil and magnetic gap, neodymium woofer
    * 165mm (6.5 in) horn loaded midrange transducer
    * 25.4mm (1 in) polymer diaphragm compression driver
    * 1500 Watt (3 x 500 watt) Class-D, Crown® digital amplifier
    * DSP input section with dbx® Type IV™ limiter circuit, crossover, dynamic limiting, component optimization, selectable system EQ
    * Professional XLR line and ¼" Mic/Instrument inputs, with loop through
    * Obsidian DuraFlex™ coated plywood construction
    * Large die-cast aluminum handle bar with a fine tuned ergonomic rubber grip for maximum comfort
    * 8 M10 Suspension points and 1 pullback point
    * Integrated 36mm pole mount socket

SPECIFICATIONS:

    * System Type: Self-powered 15", three - way, bass - reflex
    * Maximum SPL Output: 135 dB peak
    * Frequency Range (-10 dB):Flat: 41 – 19 kHz
    * Boost: 40 – 19 kHz
    * Frequency Response (±3 dB):Flat: 53 – 18 kHz Boost: 50 – 18 kHz
    * Coverage Pattern: 90º x 50º nominal
    * Amp Design: Crown® Class D
    * Power Rating: 1500 W ( 3 x 500 )
    * Dimension (H x W x D): 921 mm x 424 mm x 413 mm ( 36.29 in x 16.71 in x 16.27 in )
    * Net Weight: 27.2 kg ( 60 lb )


Free Shipping is FEDEX Ground.  Due to this being an oversize package, please call for an accurate quote for any air shipping

The PRX618S-XLF, extended low frequency subwoofer was designed and engineered to provide sub bass frequencies with accuracy and power. Used as a single sub in a sub/sat system or in multiples as part of a scalable, large format sound reinforcement system, the PRX618S-XLF performs with extreme efficiency and control.

    * The PRX618S-XLF, extended low frequency subwoofer was designed and engineered to provide sub bass frequencies with accuracy and power. Used as a single sub in a sub/sat system or in multiples as part of a scalable, large format sound reinforcement system, the PRX618S-XLF performs with extreme efficiency and control. The subs are stackable and light-weight ensuring quick set-ups and tear-downs. And due to their rugged construction are perfect for AV rental inventories. With a pole receptacle (that accepts a SS4-BK or SS4-BK24) on the top panel and integrated stereo pass-thru this is the most powerful low-frequency complement to the PRX full-range systems. The addition of a polarity reverse option further enables system optimization.

    * The PRX618S-XLF is a high performance self-powered subwoofer system. The PRX618S-XLF is comprised of a powerful 2268FF Differential Drive® dual voice-coil and magnetic gap, neodymium woofer driven by a 1000 Watt (dual 500 watt) Crown Class-D power amplifier. Dual-Bridge Technology™ directly links discrete amplifier channel outputs to each voice coil in the Differential Drive woofer. Electrical power transfer to the transducer is optimized for more power performance. A proprietary DSP chip is at the core of a fully featured input section, providing user selectable cross-over functionality, polarity optimization, protection, dynamic limiting and discrete component optimization.

    * The amplifier input panel offers stereo inputs with XLR or ¼ inch jack compatibility. A user selectable crossover ensures a smooth transition to full-range system connected to the stereo outputs. Signal present and limiter lights indicate the system status and assist in setting the optimum level, via the level control knob.

    * All PRX600 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX600 Series cabinets are protected by JBL’s tour proven DuraFlex™ finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability.

    * Special note: JBL highly recommends that no more than 70 lbs of weight be placed on a speaker pole that is mounted to a PRX618S
      or PRX618S-XLF.

FEATURES:

    * Maximum SPL 133 db peak
    * 460mm (18 in) Differential Drive® dual voice-coil and magnetic gap, neodymium woofer
    * 1000 Watt (2 x 500 watt) Class-D, Crown® digital amplifier
    * DSP input section with dbx® Type IV™ limiter circuit, crossover, dynamic limiting, component optimization, selectable system EQ
    * Professional XLR line and ¼" Mic/Instrument inputs, with loop through
    * Obsidian DuraFlex™ coated plywood construction
    * Top panel M20 pole mount socket for sub/satellite configuration
    * Large die-cast aluminum handle bar with a fine tuned ergonomic rubber grip for maximum comfort

SPECIFICATIONS:

    * System Type: Self-Powered 18",bass - reflex
    * Maximum SPL Output:133 dB peak
    * Frequency Range (-10 dB): 30 Hz – 105 Hz
    * Frequency Response (±3 dB): 39 Hz – 93 Hz
    * Polarity: Normal or reverse polarity
    * Crossover Frequency: 90 Hz
    * Amp Design: Crown® Class D
    * Power Rating: 1000 W ( 2 x 500 )
    * Dimension (H x W x D): 685.8 mm x 530.9 mm x 716.3 mm ( 27.0 in x 20.9 in x 28.2 in )
    * Net Weight: 37 kg ( 81.5 lb )